^      ^Savant DNA120 (Fisher Mandel)     ^Vacufuge  Complete system (Eppendorf)     ^
^Volume Range/Tube     |0.5 to 2.0 mL     |0.2 to 25 ml (max height of 27 mm)     |
^Maximum Tube Capacity     |"36 tubes 2ml (72 when using the 0.6 ml tubes rotor)"     |"70 tubes 2ml (F-45-70-11)"     |
^Rotor speed     |Unknown     |1400 rpm (248g) not adjustable     |
^Plate rotor max no plates     |2     |2 (A-2-VC )     |
^Vacuum Pump Type     |ETFE oil-free diaphragm pump     |Chemical-resistant PTFE diaphragm pump     |
^Displacement     |30 L/min at 50 Hz; 36 L/min at 60 Hz     |Max 2.1 cubic meter per hour (depends on the mode: aqueous, alcohol or high vapor pressure)     |
^Ultimate Vacuum Level Setting     |<10 Torr (13 mbar or 1.3 kPa)     |20 mBar (achievable ultimate pressure is 9mBar)     |
^Refrigerated Trap Capacity     |No cold trap     |Unrefrigerated 280 mL trap     |
^Heat Setting     |Ambient, 43°C; or 65°C with over-temperature safety shut-off     |Room temperature; 30°C; 45°C; 60°C     |
^Heated Cover     |Unknown     |no heated lid required     |
^Vacuum Control Ramp Rate     |Unknown     |Automatic     |
^Timer Setting     |5 minutes to 9 hours and 55 minutes and hold     |1 min to 9:59h; infinite; in 1 min increment     |
^Memory     |no programmes     |no programmes     |
^Chamber     |Teflon-coated aluminum     |Chemical-resistant stainless steel chamber     |
^Chamber Seal     |Silicone rubber     |High chemical resistivaty seal      |
^Fittings     |Polypropylene     |All steel     |
^Pump heads     |2-headed pump with ETFE diaphragms     |2-headed pump with PTFE diaphragms     |
^Cover      |Acrylic lid includes safety interlock     |Polycarbonate 1 inch     |
^Dimensions (W x D x H)     |29 x 63 x 33 cm     |32 x 53 x 30 cm     |
^Additional ventilation space     |8 cm all sides     |15 cm on all sides     |
^Weight (kg) (without rotor)     |36 (shipping 45 kg)     |31 (shipping ?)     |
^Basic Rotor     |RD36     |F-45-48-11     |
^Motor     |Maintenance-free induction motor     |Unknown     |
^Applications     |Aqueous and alcohol solvents (No ammonium hydroxide)     |Aqueous, alcohol solvents and acids (< 1.0N). Another mode is for high vapour pressure     |
^Heat Output     |3925 BTU/h     |1500 BTU/h max     |
^Max power consumption      |1150 Watts maximum     |350 W (with pump)     |
^Electrical requirement     |115 VAC / 60 Hz/ 10 amps w plugs NEMA 5-15P with an IEC 60320 C13 connector     |120V/60Hz 3A (the same model is also available in 230V)     |
^Decibel     |<65 dBA     |<50 dB (A) with pump running     |